USD$ 95 – USD$ 180
Small creamy toned oyster shell flush mount.
| Width | |
|---|---|
| Metal Finish | |
| Height | |
| Fixture Trims | Oyster Shells |
| Number of Lights | |
| Bulb Type | Incandescent/LED compatible replacements |
| Bulb Base | E12 Candelabra Base (light bulbs not included), E26 Medium Base: For 6"W model (Light Bulbs not included) |
| Bulb Shape | A19 or B11 Torpedo for use with 6"W model, B10 Torpedo |
| Bulb Wattage | Maximum 40 Watts, Maximum 60 Watts for 6"W model |
| Fixture Type | Flush Mount (C) |
| Canopy | 5" Diameter |
| Weight (lbs) | 28, 6, 8 |
| Voltage | 110-120 volt |
| Dimmable | Yes – Standard 120 volt dimmer |
| Slope Ceiling | No |
| Installation | Dry Location |
| Room Setting | Bathroom, Bedroom, Foyer/ Hallway, Kitchen, Living room, Office |
| Certification | CSA/CUS: All fixtures are certified for standard residential installation in the USA and Canada. |
| Frame Assembly | Yes: Some assembly required |
| Trimming Assembly | Yes: The crystal trimmings are packed separately to prevent breakage and should be hung after the frame has been installed |
You must be logged in to post a review.
Cathryn from Tavares, FL –
Beautiful lighting effect for the bathroom. I was worried about the shells, but they arrived in perfect shape though you do have to figure out which layer goes on each ring. The inner 2 rings of shells have just one row of shells and the outer row has 2 in the layer. The only negative (if you can call it that) is that bulb type is limited. This fits the little bulb base, and we used SMALL round clear globes. We had some candelabra bulbs, but they were a bit too long and the tips leaned against the shell layers and it didn’t lay completely flat, so we went to the big box store and bought different bulbs for a few dollars. Love it, highly recommend.